frenzel-berg_CANit-20 I_O-module 模块

 The fieldbus-module CANit-20 is a universal canopen-remote-I/O device with each 16 digital in- and outputs. This system can be used for I/O-extension of PLC's and for decentralisation in machines, industrial systems and building automation.

system

• CPU canopen-single-chip CO4011B
• supply voltage 12 .. 34V DC (typ. 24V DC)
• cable cross section0.08 .. 2,5 mm (AWG28 .. AWG14)
• temperature range -40 .. 85°C
• PC board, plastic housing, aluminium housing
• measurements approx. (LxWxH) mm 161 x 76 x 60

inputs digital

• 16 digital inputs 24V
• input filter/time constant
• status-LEDs
• galvanic separation

outputs digital

• 16 digital outputs 24V
• positive switching
• continuous output current @ 25°C 600mA
• peak output current 1,5 A (max. 1 sec)
• galvanic separation and short circuit protected
• status-LEDs

canopen

• CAN Bus according to ISO11898
• CAN-baudrates up to 1 Mbit
• node IDs adjustable from 1 .. 127
• canopen draft standard DS301 V4.0 / DS401 V2.1
• canopen diagnostic LEDs
• 1 receive PDO / 2 transmit PDO
• 1 SDOs Server
• PDO-Event Timer
• PDO-Inhibit Timer
• PDO-transmission modes event triggered, synchronous, asynchronous, cyclic, acyclic, remote frame related
• variable PDO-Identifier
• dynamic PDO-Mapping
• Emergency
• nodeguarding/lifeguarding/heartbeat
• EDS-file

downloads

datasheet
EDS-File

ordering information